Remanufacturing Guide: Xerox WorkCentre 3115 Toner Cartridge

The Xerox WorkCentre 3115 series of printers are based on a 33-37 ppm Multifunction engine (depending on the model) with a maximum resolution of 1200 x 1200 dpi. The first page out is stated to be under 6.5 seconds. The monthly duty cycle is rated at 80,000 pages per month and they come standard with a 360 MHz (3315) or a 600 MHz (3325 series) processor. The WorkCentre 3115 has a standard memory of 128Mb which is upgradeable to 384mb. The WorkCentre 3325 comes with 256Mb of memory and is upgradeable to 768Mb. The 3325DNI also has wifi connectivity built in. All machines are multifunction and are capable of Printing, Copying, Faxing, and Scanning.

The WorkCentre 3115 cartridges do not have a drum cover, and come new with a piece of heavy paper with a thin sheet of foam on the inside taped around the cartridge. Inside the foam cover also has a thin plastic shipping lock that pulls the PCR off the drum so that no flat spots occur on the PCR during storage

As with most cartridges these days there are no screws in the outside of the cartridge at all. There are plastic rivets that need to be cut off, holes drilled and screws installed to hold them back on.

Click here for the step-by-step guide:
http://issuu.com/recyclingtimes/docs/techzone52

Click here to visit our UniNet Tech•Zone Library.