How Recycle a Starter Cartridge for the Xerox CP315 Series?

How to recycle a starter cartridge for the Xerox CP315 Series? Let Zhono help you! The most economical way to recycle is to purchase a Zhono chip for use in the Xerox CP315 and install it on a used starter toner cartridge so that it can be reused.

How to install the Zhono chip? Please use the following detailed installation instructions:

Step 1. Locate chip installation position onposition on the cartridge at Fig.1.1 Fig. 1.2 shows the area to prepare for installing a chip.


Fig. 1.1                                                                                                 Fig. 1.2

Step 2. Use a soldering iron to trace the location, and then make a groove for the cartridge chip. See Fig.2.

Caution:To prevent toner and carrier leakage while grooving take care not to cut into the toner port.

zhono chip 2

Fig. 2

Step 3.  Attach the new Zhono chip with a double-sided tape. Please note chip orientation and position must be aligned as in Fig.3.

zhono fig3

Fig. 3

Note notch in chip.  Orient chip in direction of arrow. See Fig.3


The surface coating of the OPC drum is easily damaged. Improper handling increases risk of OPC drum damage. During OPC drum removal and installation  do not hit the surface of the OPC drum with hard objects.  Print defects, spots or lines on the printed page, can be caused by sweat and oil contamination on the OPC drum coating.  Do not touch the OPC Drum coating.  Handle the OPC drum by holding the gear or bare metal surface.


0 replies

Leave a Comment

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *