UniNet Intros New Toners and Components

UniNet announced the launch of new toners and components used for Dell, Kyocera, Samsung and Brother printers.

  • X Generation® black toner and components for use in Dell B3460 monochrome printer series.

The Dell B3460 is a 47-ppm monochrome laser printer targeted at small to mid-sized workgroups. It features duplex and wireless printing capabilities, all for less than USD$250. OEM toner cartridges are offered in three versions: 2,500 pages, 8,500 pages and 20,000 pages. The imaging unit (drum cartridge) is rated at 60,000 pages.
UniNet said this is a potentially very profitable cartridge because it is considered an EASY TO REMANUFACTURE cartridge; it is easily refilled by removing the end cap and fill plug, adding the chip, and that is all that is needed to remanufacture this cartridge.

  • ABSOLUTE COLOR® TONER & COMPONENTS FOR KYOCERA FS-C5300 TK-560, 562, 564 color printer series

The Kyocera FS-C5300 color printer is a 26-ppm, duplex printer capable of printing up to 9,600 x 600 dpi resolution.
As was revealed, featuring Kyocera’s ECOSYS printing technology, the toner is the only component that gets replaced; therefore, this is a potentially very profitable cartridge because it is considered EASY TO REMANUFACTURE.
The drum units last up to 200,000 pages, meaning most users will never replace the drum cartridges. Toner cartridge (TK-564) is supplied in 12,000 page cartridges for black and 10,000 page cartridges for the three colors.

  • NEW ENERGY EFFICIENT TONER – MULTIPURPOSE FOR SAMSUNG SL-M4070, ML-4550, 4050 & OTHER MODELS

This Multipurpose MLU2 formula has been qualified in over 50 Samsung ML, SCX and SL-M printer series.
According to UniNet, as most remanufacturers are aware, toners released for newer machines will often be backward compatible with older models, and having a toner to use across multiple engine models makes life easier for remanufacturers, reducing inventories and helping to keep costs down, while maximizing profits.
This new version toner is a polyester based formula that works in many of the older and new multifunction Samsung models, and represents by far the lowest cost solution when reusing all OEM components.
UniNet Multipurpose MLU2 toner features OEM type densities, yields and fusing properties, and has been qualified with SuMMiT® OPC drum to guarantee 3+ cycles.
A lower toner melting point also compliments the energy efficiency mode feature.

  • ABSOLUTE BLACK® TONER & COMPONENTS FOR BROTHER HL-5470 TN780, 750, 720 MFC

The Brother HL-5470 is a 40-ppm monochrome laser printer similar to previous Brother designs. This high-speed model is available in the market for only USD $250.00 and offers duplex capability and 1200 x 1200 dpi resolution.
The OEM toner cartridges are supplied as TN720 (3,000 pages) and TN750 (8,000 pages).

  • X GENERATION® BLACK TONER & COMPONENTS FOR DELL 3333 & 3335 MFP

The Dell 3333 and 3335 MFPs are 40-ppm monochrome laser printers featuring print, copy & scan functions.
These MFPs use OEM toner cartridges rated at 8,000 pages and 14,000 pages with the drum cartridge rated at 30,000 pages.
For further information, please visit www.uninetimaging.com

0 replies

Leave a Comment

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *